Products

• Thru-Hole Lead Bender for Resistors Diodes Capacitors
• Enclosure for Arduino Pocket Calculator DIY Kit - 3D printed
• Temperature Monitoring with Alarm DIY Soldering Kit
• D1 Mini Keypad / JoyPad I2C
• D1 Mini ADS1115 ADC (4 Channel, 16Bit, I2C)
• D1 Mini GPIO Expander I2C 8-Channel
• Arduino Pocket Calculator DIY Kit
• DIN Rail Mounting Kit for PLC-100 Series
• CANABLOX Permanent Breadboard size 'L' (CX-PBB-L) Set of 2
• CANABLOX Permanent Breadboard size 'MV' (CX-PBB-MV) Set of 2
• CANABLOX Permanent Breadboard size 'MH' (CX-PBB-MH) Set of 2
• CANABLOX Permanent Breadboard size 'S' (CX-PBB-S) Set of 2
• CANABLOX Mounting Hardware Kit for 5 modules (CX-HARD5)
• CANABLOX Unused Slot Cover (CX-FILL-S) Set of 5
• CANABLOX Base 'L' with 4x4 Module Slots (CX-BASE-L)
• CANABLOX Base 'M' with 3x3 Module Slots (CX-BASE-M)
• CANABLOX Base 'S' with 2x2 Module Slots (CX-BASE-S)
• CANABLOX Base 'V' with 2x4 Module Slots (CX-BASE-V)
• CANABLOX Base 'H' with 4x2 Module Slots (CX-BASE-H)
• CANABLOX XIAO MCU Module Carrier I2C (CX-XIAO-S)
• CANABLOX XIAO Screw Terminal Module (CX-XIAO-MH)
• CANABLOX RGBCIR Color Sensor I2C (CX-VEML3328-S)
• CANABLOX Stemma - Qwiic - Grove - Converter I2C (CX-SQG-S)
• CANABLOX I2C Pull-Up Resistor Module 2.2k (CX-PULLUP-S)
• CANABLOX 2:1 Channel I2C Bus Multiplexer (CX-MUX-S)
• CANABLOX 16-Channel GPIO Expander I2C (CX-MCP23017-MH)
• CANABLOX 4-Channel 12-Bit DAC I2C (CX-MCP4728-S)
• CANABLOX Single-Channel 12-Bit DAC I2C (CX-MCP4725-S)
• CANABLOX 9x16 / 144 LED Matrix Display I2C Red (CX-LEDMX-MH)
• CANABLOX 4 x 16 Characters LCD Module I2C (CX-LCD164-L)
• CANABLOX 16-Key 0-9, A-F Hexadecimal Keypad I2C (CX-KEYPAD-S)
• CANABLOX I2C External Power Injector (CX-INJECT-S)
• CANABLOX 10-Channel GPIO Status Indicator Module (CX-INDICA-MV)
• CANABLOX Current Sensor Module I2C 0.0003mA to 1000mA (CX-INA219-S)
• CANABLOX WWVB-BPSK Atomic Clock Receiver ES100 I2C (CX-ES100-MH)
• CANABLOX 1Mbit EEPROM Module I2C (CX-EEPROM-S)
• CANABLOX High-Precision Real-Time-Clock Module I2C (CX-DS3231-S)
• CANABLOX Temperature-Humidity-Pressure-Gas Sensor Module I2C (CX-BME680-S)
• CANABLOX DC-DC Converter Module 6-15V to 3.3V/5V (CX-DCDC-S)
• CANABLOX Temperature-Humidity-Pressure Sensor Module I2C (CX-BME280-S)
• CANABLOX ATmega328 MCU Module for Arduino (CX-AT328-MH)
• CANABLOX 3-Axis Accelerometer I2C (CX-ADXL345-S)
• CANABLOX 4-Channel 16-Bit ADC I2C (CX-ADS1115-S)
• CANABLOX 6-Digit 7-Segment Display I2C (CX-6X7SEG-MH)
• CANABLOX Dual UART Serial Interface Module I2C (CX-2UART-S)
• 5 x I2C cable 10cm for STEMMA QT / Qwiic / CANABLOX
• 5 x I2C cable 5cm for STEMMA QT / Qwiic / CANABLOX
• MEGA2560 PLC-300 V2 DIY soldering kit
• RP2040 PLC-100 V1 (for RP2040 Zero)
• ESP32 PLC-100 V1 (for Espressif ESP32-C6-DevKitC)
• MEGA328 PLC-100 V2 SMD (for Arduino Nano)
• 8 Channel Logic Level Shifter 1.8V-3.3V-5V-12V replaces TXS0108E
• LED Clock DIY Kit with Melody Alarm (option) for Arduino Nano V3
• High Precision 1Hz Clock Generator / Time Base 3.8ppm 1024Hz output 3-5V
• 10-bit Breadboard Logic Level Indicator 3.3V to 5V - cascadable (Set of 2)
• HK66T-OA Melody Chip 'Jingle Bells' TO-92
• HK66T-19 Melody Chip 'Für Elise' TO-92
• HK66T-11 Melody Chip 'Love Me Tender' TO-92
• HK66T-08 Melody Chip 'Happy Birthday' TO-92
• Permanent Breadboard XL - 1904 Tie Points
• Permanent Breadboard L - 1008 Tie Points - Set of 2
• Permanent Breadboard M - 464 Tie Points - Set of 3
• Power Supply USB UART Module for CANADUINO® Permanent Breadboards
• Permanent Breadboard S - 224 Tie Points - Set of 3
• Electronic Education DIY Kit "The broken code lock" (Troubleshooting Project)
• Adjustable Clock Generator DIY Kit with NE555 Timer, 1Hz-1.5MHz Frequency Range
• Burglar Alarm with Time Delay NE555 DIY soldering kit
• Touch Sensor Light Switch with Off-Delay 0-60s DIY soldering kit
• Police Emergency Flasher DIY Soldering Kit
• Stereo TDA2030 Audio Amplifier DIY Soldering Kit with Tone control V1.2
• 4-Ch. I2C Relay Shield DIY Kit for Arduino - stackable
• 8-Ch. I2C Relay Shield DIY Kit for Arduino - stackable
• EverSet ES100 WWVB BPSK Atomic Clock Starter Kit
• EverSet ES100-MOD WWVB BPSK Phase Modulation Receiver Module
• Carrier Board for EverSet ES100-MOD - Breakout Board
• EverSet ES100 ADK V2 Atomic Clock DIY kit for WWVB-BPSK
• STM32 Blue Pill - Black Pill Screw Terminal Adapter, LDO, RTC Battery Backup
• Atomic Clock Antenna DCF77 (77.5kHz for Europe)
• MEGA328 PLC-100 DIY Kit V2 (for Arduino Nano)
• DIN Rail Mounting Kit for PLC-300
• Loop Stick Antenna 60kHz for Atomic Clock Receiver
• Stand-Alone Arduino Bootloader Programmer V3 for Atmega328P
• Breadboard Power Supply 3.3V, 5V, 12V with USB TTL UART
• ZIF Socket Shield for Arduino V2 - Atmega328P programmer - DIY Soldering Kit
• DCF77 Atomic Clock Receiver V4 77.5kHz for Europe
• 60kHz Atomic Clock Receiver V4 (WWVB, MSF, JJY60)
• Atmega328P-PU Arduino bootloader installed DIP-28