-
400W LED Driver CC-CV and DC-DC Boost Converter 10-60V
Constant-current and constant-voltage driver for high power LEDs up to 400W. With overload-protection.
-
AC-DC Converter 12V 400mA Module – 85-265VAC input
High-efficiency switching power supply with wide input voltage range for worldwide operation.
-
AC-DC Converter 5V 700mA – 85-265VAC input
Insulated power supply module, temperature protection, over current protection and short circuit protection.
-
AC-DC Power Supply 12V 2A DC – input 110/220VAC
Insulated power supply with a small 85x58mm footpint, over-current and short-circuit protection.
-
AC-DC Power Supply 12V 3A – input 110-240VAC
Burn-in tested power supply module with up to 88% efficiency and 150% overload protection.
-
AC-DC Power Supply 5V 3A DC – input 110/220VAC
Insulated power supply with a small 85x58mm footpint, over-current and short-circuit protection.
-
Automatic DC-DC Buck-Boost SEPIC Converter 10A, 1-30V
Continuous output 8A (peak 10A). The input voltage can be lower or higher than the selected output voltage (auto buck-boost). Up to 130W output power with additional heat sink.
-
Boost-Buck DC-DC Converter USB Input – 1.2-24V Output
With trimmer potentiometer for voltage adjustment and integrated LED voltmeter.
-
CANADUINO Breadboard Power Supply 3.3V, 5V, 12V with USB TTL UART
Adds high-efficiency switching converter with 3.3V, 5V and 12V output, and a USB Type-C interface for programming and debugging to your breadbaord project.
-
DC-DC Boost Converter 6W 2.5-5V to 5V 8V 9V 12V – 6W
Super Mini DC-DC Boost Converter 6W output power! Powered by an input voltage of 2.
-
DC-DC Converter 200W – Output 1.25-36V adjustable, max. 8A
Adjustable output step-down (buck) converter with a maximum output current of 10A (continuous 8A) requires 8-40V input voltage.
-
Mini DC-DC automatic buck/boost SEPIC converter 5V 600mA
Only 19x14mm small. Provides stable 5V operating voltage from a single Lithium cell, a few AA batteries or the 12V lighter port. So versatile!
-
Mini DC-DC Converter 10W 2-20V 3A
Delivers a maximum of 3A or 10W output from an input voltage of 4.6 to 26V DC.
-
Mini DC-DC Step-Down Converter 16W 4.5-16V to 3.3V 5V 7.3V 9V
Super low-cost but powerful buck converter with 2A maximum output current. Voltage selection through solder jumpers.
-
Power Supply USB UART Module for CANADUINO® Permanent Breadboards
The perfect accessory for our solderless breadboards. It adds 3.3V and 5V power supply and a USB Type-C port with USB 2.0 serial interface to your device.
-
Programmable PWM DC Motor Speed Controller 5-30V, 5A
Programmable PWM frequency range 1kHz-99kHz and programmable duty cycle range 0%-100%.
-
USB 5V Power Supply DC-DC Converter 5A
With 4 USB-A outputs and a total current delivery capability of 5A. Requires input voltage of 9-36V DC. High-efficiency switching DC-DC converter.
-
2 Pcs. Super Tiny DC-DC Converter 1-17V 3A, 11 x 17mm
Input voltage range 4.75 to 23V DC, efficiency up to 96%. So small, so powerful!
-
3.7V Lithium Charger Booster 4.2-27V Output, 5W
Single cell lithium charger (1A) and booster converter with up to 27V output voltage in one small module.
-
DC-DC booster converter 10A 6-55V (200W)
Designed for 6V to 35V input voltage and offers up to 97% efficiency. The maximum output current is 7A.
Shopping Cart