-
8 Channel Logic Level Shifter 1.8V-3.3V-5V-12V replaces TXS0108E
Pin-compatible to the Chinese TXS0108E modules, but easier to use, more reliable and a much better choice for I2C and SPI conversions.
-
Breadboard Power Supply 3.3V, 5V, 12V with USB TTL UART
Adds high-efficiency switching converter with 3.3V, 5V and 12V output, and a USB Type-C interface for programming and debugging to your breadbaord project.
-
CANABLOX 16-Channel GPIO Expander I2C (CX-MCP23017-MH)
The CANABLOX® 16-Channel GPIO Expander CX-MCP23017-MH provides 16 general I/O digital ports. Each pin can be configured individually as input or output.
-
CANABLOX 2:1 Channel I2C Bus Multiplexer (CX-MUX-S)
The CANABLOX® 2:1 Channel I2C Bus Multiplexer CX-MUX-S uses a TCA9546A bus switch that lets a single master communicate with 2 devices that share the same I²C address. CX-MUX-S uses the TCA9546A channels 0 and 1 (on the module A and B), making it a 2:1 I2C multiplexer.
-
CANABLOX 4-Channel 12-Bit DAC I2C (CX-MCP4728-S)
The CANABLOX® 4-Channel 12-Bit DAC CX-MCP4728-S provides four independent 12-bit DAC outputs with per-channel EEPROM to store settings (code, reference, gain, power-down).
-
CANABLOX 4-Channel 16-Bit ADC I2C (CX-ADS1115-S)
The CANABLOX® 4-Channel 16-Bit ADC CX-ADS1115-S can capture 4 analog voltage values between 0 and 3.3V connected between GND and its inputs. The maximum resolution in this mode is 0.25mV per bit. The module comes in the CANABLOX® Form Factor “S” (Single Slot).
-
CANABLOX Dual UART Serial Interface Module I2C (CX-2UART-S)
The CANABLOX® Dual UART Serial Interface CX-2UART-S is an I2C to serial converter with 2 Channels in the CANABLOX® Form Factor “S” (Single Slot).
-
CANABLOX I2C External Power Injector (CX-INJECT-S)
The CANABLOX® I2C External Power Injector CX-INJECT-S will help you to provide more power to the I2C bus than your host (MCU) can deliver.
-
CANABLOX Single-Channel 12-Bit DAC I2C (CX-MCP4725-S)
The CANABLOX® Single-Channel 12-Bit DAC CX-MCP4725-S is based on the Microchip MCP4725 which provides a precise, continuously adjustable analog output voltage and includes an on-chip EEPROM to store output settings.
-
CANABLOX Stemma – Qwiic – Grove – Converter I2C (CX-SQG-S)
The CANABLOX® Stemma – Qwiic – Grove I2C bus converter CX-SQG-S allows to connect I2C devices with “Grove” connector cables and “Stemma” connector cables to the CANABLOX® I2C bus (compatible with Qwiic / Stemma QT).
-
D1 Mini ADS1115 ADC (4 Channel, 16Bit, I2C)
The CANADUINO® D1 Mini ADS1115 module adds four 16‑bit precision analog inputs to your D1 Mini setup.
-
D1 Mini GPIO Expander I2C 8-Channel
The CANADUINO® D1 Mini 8-Channel GPIO Expander adds 8 extra digital input/output pins to your D1 Mini setup.
Shopping Cart