-
8 Channel Logic Level Shifter 1.8V-3.3V-5V-12V replaces TXS0108E
Pin-compatible to the Chinese TXS0108E modules, but easier to use, more reliable and a much better choice for I2C and SPI conversions.
-
Breadboard Power Supply 3.3V, 5V, 12V with USB TTL UART
Adds high-efficiency switching converter with 3.3V, 5V and 12V output, and a USB Type-C interface for programming and debugging to your breadbaord project.
-
CANABLOX 10-Channel GPIO Status Indicator Module (CX-INDICA-MV)
The CANABLOX® 10-Channel GPIO Status Indicator CX-INDICA-MV can show the logic state (high or low) for up to 10 signals (3.3V logic level – absolute maximum 3.8V; measured to GND) on its 10 LEDs.
-
CANABLOX 16-Channel GPIO Expander I2C (CX-MCP23017-MH)
The CANABLOX® 16-Channel GPIO Expander CX-MCP23017-MH provides 16 general I/O digital ports. Each pin can be configured individually as input or output.
-
CANABLOX 16-Key 0-9, A-F Hexadecimal Keypad I2C (CX-KEYPAD-S)
The CANABLOX® 16-Key 0-9, A-F Hexadecimal Keypad CX-KEYPAD-S is based on the PCF8574A I/O Expander. The module is available in the Single Slot form factor.
-
CANABLOX 1Mbit EEPROM Module I2C (CX-EEPROM-S)
The CANABLOX® 1Mbit EEPROM Module CX-EEPROM-S is based on the FT24C1024A, a non-volatile memory chip offering 1 Mbit (128 kB) of storage, organized as 131,072 × 8 bits.
-
CANABLOX 2:1 Channel I2C Bus Multiplexer (CX-MUX-S)
The CANABLOX® 2:1 Channel I2C Bus Multiplexer CX-MUX-S uses a TCA9546A bus switch that lets a single master communicate with 2 devices that share the same I²C address. CX-MUX-S uses the TCA9546A channels 0 and 1 (on the module A and B), making it a 2:1 I2C multiplexer.
-
CANABLOX 3-Axis Accelerometer I2C (CX-ADXL345-S)
The CANABLOX® 3-Axis Accelerometer CX-ADXL345-S measures acceleration: How quickly something speeds up, slows down, or changes direction.
-
CANABLOX 4 x 16 Characters LCD Module I2C (CX-LCD164-L)
The CANABLOX® 4×16 Characters LCD Module CX-LCD164-L with integrated SSD1803A controller provides 4 lines with 16 characters or 2 lines of 16 characters with double height.
-
CANABLOX 4-Channel 12-Bit DAC I2C (CX-MCP4728-S)
The CANABLOX® 4-Channel 12-Bit DAC CX-MCP4728-S provides four independent 12-bit DAC outputs with per-channel EEPROM to store settings (code, reference, gain, power-down).
-
CANABLOX 4-Channel 16-Bit ADC I2C (CX-ADS1115-S)
The CANABLOX® 4-Channel 16-Bit ADC CX-ADS1115-S can capture 4 analog voltage values between 0 and 3.3V connected between GND and its inputs. The maximum resolution in this mode is 0.25mV per bit. The module comes in the CANABLOX® Form Factor “S” (Single Slot).
-
CANABLOX 6-Digit 7-Segment Display I2C (CX-6X7SEG-MH)
The CANABLOX® 6-Digit 7-Segment Display CX-6X7SEG-MH is an I2C-connected LED display based on the CH423S I/O-Expander chip in the CANABLOX® Form Factor “MH” (2×1 Slot).
Shopping Cart