-
CANABLOX I2C Pull-Up Resistor Module 2.2k (CX-PULLUP-S)
The CANABLOX® I2C Pull-Up Resistor Module CX-PULLUP-S with 2.2k pull-up resistors can be used at the end of a long I2C bus or when many devices are connected to the bus, to improve bus performance and signal integrity.
-
CANABLOX Mounting Hardware Kit for 5 modules (CX-HARD5)
The CANABLOX® Mounting Hardware Kit for 5 modules CX-HARD5 contains the standoffs, couplers and screws to mount 5 CANABLOX® modules or slot covers to a base plate.
-
CANABLOX Permanent Breadboard size ‘L’ (CX-PBB-L) Set of 2
The CANABLOX® Permanent Breadboard CX-PBB-L (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX Permanent Breadboard size ‘MH’ (CX-PBB-MH) Set of 2
The CANABLOX® Permanent Breadboard CX-PBB-MH (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX Permanent Breadboard size ‘MV’ (CX-PBB-MV) Set of 2
The CANABLOX® Permanent Breadboard CX-PBB-MV (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX Permanent Breadboard size ‘S’ (CX-PBB-S) Set of 2
The CANABLOX® Permanent Breadboard size ‘S’ CX-PBB-S (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX RGBCIR Color Sensor I2C (CX-VEML3328-S)
The CANABLOX® RGBCIR Color Sensor CX-VEML3328-S uses the Vishay VEML3328 as digital color sensor that measures red, green, blue, clear, and infrared (RGBCIR) light components with high sensitivity and low noise.
-
CANABLOX Single-Channel 12-Bit DAC I2C (CX-MCP4725-S)
The CANABLOX® Single-Channel 12-Bit DAC CX-MCP4725-S is based on the Microchip MCP4725 which provides a precise, continuously adjustable analog output voltage and includes an on-chip EEPROM to store output settings.
-
CANABLOX Stemma – Qwiic – Grove – Converter I2C (CX-SQG-S)
The CANABLOX® Stemma – Qwiic – Grove I2C bus converter CX-SQG-S allows to connect I2C devices with “Grove” connector cables and “Stemma” connector cables to the CANABLOX® I2C bus (compatible with Qwiic / Stemma QT).
-
CANABLOX Temperature-Humidity-Pressure Sensor Module I2C (CX-BME280-S)
The CANABLOX® Temperature-Humidity-Pressure Sensor CX-BME280-S measures temperature (-40 to +85 °C, ±1 °C accuracy), humidity (0–100% RH, ±3% accuracy), and barometric pressure (300–1100 hPa, ±1 hPa accuracy).
-
CANABLOX Temperature-Humidity-Pressure-Gas Sensor Module I2C (CX-BME680-S)
The CANABLOX® Temperature-Humidity-Pressure-Gas Sensor CX-BME680-S measures temperature (-40 to +85 °C, ±1 °C accuracy), humidity (0–100% RH, ±3% accuracy), and barometric pressure (300–1100 hPa, ±1 hPa accuracy), and additionally includes a gas sensor for air-quality monitoring (detecting VOCs).
-
CANABLOX Unused Slot Cover (CX-FILL-S) Set of 5
The CANABLOX® Unused Slot Cover CX-FILL-S to fill the holes (unused slots) in your CANABLOX® device. This is a set of 5.
Shopping Cart