-
CANABLOX 9×16 / 144 LED Matrix Display I2C Red (CX-LEDMX-MH)
The CANABLOX® 144 LED Matrix Display CX-LEDMX-MH is built around the IS31FL3731 LED driver IC, which provides autonomous PWM control (8-bit, 256 steps), 144 LEDs multiplexing, and onboard frame memory for smooth animations without constant MCU refresh.
-
CANABLOX ATmega328 MCU Module for Arduino (CX-AT328-MH)
The CANABLOX® ATmega328 MCU Module CX-AT328-MH is like an Arduino UNO R3 in the CANABLOX® Form Factor “MH” (2×1 Slot) and operating on 3.3V. You program it using the Arduino IDE and selecting the Arduino UNO board. Make sure that external devices use 3.3V logic level.
-
CANABLOX Base ‘H’ with 4×2 Module Slots (CX-BASE-H)
The CANABLOX® Base ‘H’ with 4×2 Module Slots CX-BASE-H provides 8 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX Base ‘L’ with 4×4 Module Slots (CX-BASE-L)
The CANABLOX® Base ‘L’ with 4×4 Module Slots CX-BASE-M provides 16 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX Base ‘M’ with 3×3 Module Slots (CX-BASE-M)
The CANABLOX® Base ‘M’ with 3×3 Module Slots CX-BASE-M provides 9 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX Base ‘S’ with 2×2 Module Slots (CX-BASE-S)
The CANABLOX® Base ‘S’ with 2×2 Module Slots CX-BASE-S provides 4 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX Base ‘V’ with 2×4 Module Slots (CX-BASE-V)
The CANABLOX® Base ‘V’ with 2×4 Module Slots CX-BASE-V provides 8 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX Current Sensor Module I2C 0.0003mA to 1000mA (CX-INA219-S)
The CANABLOX® Current Sensor Module CX-INA219-S is a High-Precision Sensor based on the INA219 chip with three different shunt resistors to cover three optimized measuring ranges
-
CANABLOX DC-DC Converter Module 6-15V to 3.3V/5V (CX-DCDC-S)
The CANABLOX® DC-DC Converter CX-DCDC-S requires an input voltage of 6-12V DC and provides regulated 5V and 3.3V output voltages with up to 1.5A. It comes in the CANABLOX® Form Factor “S” (Single Slot).
-
CANABLOX Dual UART Serial Interface Module I2C (CX-2UART-S)
The CANABLOX® Dual UART Serial Interface CX-2UART-S is an I2C to serial converter with 2 Channels in the CANABLOX® Form Factor “S” (Single Slot).
-
CANABLOX High-Precision Real-Time-Clock Module I2C (CX-DS3231-S)
The CANABLOX® Real-Time-Clock Module CX-DS3231-S, based on the Maxim DS3231M, is a highly accurate real-time clock with an integrated temperature-compensated oscillator. It keeps track of seconds, minutes, hours, day, date, month, and year, with ±5 ppm accuracy (±2.6 minute per year) from -40 to +85 °C.
-
CANABLOX I2C External Power Injector (CX-INJECT-S)
The CANABLOX® I2C External Power Injector CX-INJECT-S will help you to provide more power to the I2C bus than your host (MCU) can deliver.
Shopping Cart