New Arrivals
The most recently added products.
-
Out of stockDIN Rail Mounting Kit for PLC-100 Series
For professional installation of a CANADUINO PLC-100 Series logic controller module. Snaps right onto a standard 35mm DIN Rail.
-
CANABLOX® Permanent Breadboard size ‘L’ (CX-PBB-L) Set of 2
The CANABLOX® Permanent Breadboard CX-PBB-L (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX® Permanent Breadboard size ‘MV’ (CX-PBB-MV) Set of 2
The CANABLOX® Permanent Breadboard CX-PBB-MV (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX® Permanent Breadboard size ‘MH’ (CX-PBB-MH) Set of 2
The CANABLOX® Permanent Breadboard CX-PBB-MH (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX® Permanent Breadboard size ‘S’ (CX-PBB-S) Set of 2
The CANABLOX® Permanent Breadboard size ‘S’ CX-PBB-S (Set of 2) for your own module development. The I2C bus, including 3.3V power rail and GND, is accessible via base plate connection.
-
CANABLOX® Mounting Hardware Kit for 5 modules (CX-HARD5)
The CANABLOX® Mounting Hardware Kit for 5 modules CX-HARD5 contains the standoffs, couplers and screws to mount 5 CANABLOX® modules or slot covers to a base plate.
-
CANABLOX® Unused Slot Cover (CX-FILL-S) Set of 5
The CANABLOX® Unused Slot Cover CX-FILL-S to fill the holes (unused slots) in your CANABLOX® device. This is a set of 5.
-
CANABLOX® Base ‘L’ with 4×4 Module Slots (CX-BASE-L)
The CANABLOX® Base ‘L’ with 4×4 Module Slots CX-BASE-M provides 16 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX® Base ‘M’ with 3×3 Module Slots (CX-BASE-M)
The CANABLOX® Base ‘M’ with 3×3 Module Slots CX-BASE-M provides 9 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX® Base ‘S’ with 2×2 Module Slots (CX-BASE-S)
The CANABLOX® Base ‘S’ with 2×2 Module Slots CX-BASE-S provides 4 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX® Base ‘V’ with 2×4 Module Slots (CX-BASE-V)
The CANABLOX® Base ‘V’ with 2×4 Module Slots CX-BASE-V provides 8 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX® Base ‘H’ with 4×2 Module Slots (CX-BASE-H)
The CANABLOX® Base ‘H’ with 4×2 Module Slots CX-BASE-H provides 8 CANABLOX® module slots with internal I2C bus, ground and power line.
-
CANABLOX® XIAO MCU Module Carrier I2C (CX-XIAO-S)
The CANABLOX® XIAO MCU Module Carrier CX-XIAO-S adapts a Seeed Studio XIAO module to the CANABLOX® System.
-
CANABLOX® XIAO Screw Terminal Module (CX-XIAO-MH)
The CANABLOX® XIAO Screw Terminal CX-XIAO-MH is a breakout board for Seeed Studio XIAO modules with screw terminals to access all its pins except the I2C bus.
-
CANABLOX® RGBCIR Color Sensor I2C (CX-VEML3328-S)
The CANABLOX® RGBCIR Color Sensor CX-VEML3328-S uses the Vishay VEML3328 as digital color sensor that measures red, green, blue, clear, and infrared (RGBCIR) light components with high sensitivity and low noise.
-
CANABLOX® Stemma – Qwiic – Grove – Converter I2C (CX-SQG-S)
The CANABLOX® Stemma – Qwiic – Grove I2C bus converter CX-SQG-S allows to connect I2C devices with “Grove” connector cables and “Stemma” connector cables to the CANABLOX® I2C bus (compatible with Qwiic / Stemma QT).
Brand’s deal
Save up to $200 on select Samsung washing machine
Tortor purus et quis aenean tempus tellus fames.
