Electronic Parts, Modules and DIY Kits for Business, Hobby, and Education.
With your support, CANABLOX™ can launch as one of the most complete modular prototyping platforms ever developed – covering over 60 planned modules for sensors, controllers, displays, inputs, memory, and more.
Please support our campaign on Indiegogo!
Bestsellers
-
CANADUINO MEGA2560 PLC-300 V2 DIY soldering kit
Professional, programmable logic controller for Arduino MEGA 2560 with 2 x RS232 ports, 54 digital and analog inputs and outputs, socket for XIAO Wi-Fi module and I2C ports.
-
CANADUINO MEGA328 PLC-100 V2 SMD (for Arduino Nano)
This is the assembled and tested version of our Arduino Nano-based PLC-100 programmable logic controller module with 8 inputs and 10 outputs, analog and digital ports, RTC and I2C interface.
-
CANADUINO® Permanent Breadboard M – 464 Tie Points – Set of 3
Permanent breadboards are a smart solution to avoid the time consuming and costly design of a custom circuit board.
-
Electronic Education DIY Kit “The broken code lock” (Troubleshooting Project)
A DIY soldering kit with “integrated” design flaws. Understand the working principle, find the mistakes on the PCB and in the schematics, and make it work.
-
Police Emergency Flasher DIY Soldering Kit
Only use it as a toy! The “wings” with the red and blue LEDs can be separated from the main-PCB and connected using wires. Adjustable flicker speed.
-
Mini DC-DC automatic buck/boost SEPIC converter 5V 600mA
Only 19x14mm small. Provides stable 5V operating voltage from a single Lithium cell, a few AA batteries or the 12V lighter port. So versatile!
-
CANADUINO 8-Ch. I2C Relay Shield DIY Kit for Arduino – stackable
With 8 selectable I2C addresses, up to 8 of these modules can be stacked for a total of 64 relays.
-
Automatic DC-DC Buck-Boost SEPIC Converter 10A, 1-30V
Continuous output 8A (peak 10A). The input voltage can be lower or higher than the selected output voltage (auto buck-boost). Up to 130W output power with additional heat sink.
-
STM32 Blue Pill – Black Pill Screw Terminal Adapter, LDO, RTC Battery Backup
The only screw terminal module specifically designed for STM32 development modules. A CR1220 coin cell can keep the STM32’s internal RTC running.
-
LED Panel Meter Voltmeter Ammeter 100VDC 10A
Operating voltage 4-30V (DC) can be supplied from the measuring voltage if 30V (DC) is not ecceeded.
-
CANADUINO MEGA328 PLC-100 DIY Kit V2 (for Arduino Nano)
A programmable logic controller DIY soldering kit with real-time clock, 4 digital inputs, 6 relay outputs, and 0-10V analog inputs and outputs. I2C connector.
-
LCD 1602 Blue, White Backlight – 2×16 Characters
Standard LCD with 4/8-bit bus and excellent performance. Esthetic design with white characters on blue background. I2C as an option.
-
8×8 Addressable LED Matrix with 64 x WS2812B RGB LED
All addressable LED modules with WS2812B LEDs can be cascaded to build even bigger clusters. 64 LEDs require up to 3.8A at 4-7V and full brightness.
-
LCD 2004A 4×20 Character Green Yellow – Backlight – 4/8 bit parallel (I2C optional)
Standard character display with great contrast and visibility even without backlight (transflective). I2C interface optional.
-
OLED I2C 0.96 inch, 128×64 Pixel, SSD1306 SH1106, 3-5V
Nice little display provides clear white graphics and text on a dark blue background. I2C interface for easy connection and programming.
-
Solderless breadboard 830 Tie Points – Adhesive Back – Detachable Power Lanes
Standard 830 tie-point breadboard with detachable power lanes and adhesive backing (peel & stick).
-
CANADUINO Breadboard Power Supply 3.3V, 5V, 12V with USB TTL UART
Adds high-efficiency switching converter with 3.3V, 5V and 12V output, and a USB Type-C interface for programming and debugging to your breadbaord project.
-
60kHz Atomic Clock Receiver V4 (WWVB, MSF, JJY60)
“Atomic Clock” high-performance AM receiver kit for 60kHz is compatible with the radio stations in North America, England, and Japan.
